METAWRAP – MDX – CYLINDER CAST

You are here:

Home
Products
METAMARK
METAWRAP – MDX – CYLINDER…

MetaWrap is manufactured differently from other wrapping films. It resets economics & comes in a selection of variations with specialist adhesives & added features. And it’s suitable for a vast range of applications where performance and trust are critical.

Developed to flow and conform over the most challenging surfaces. Supplied with MetaScape® air release adhesive
system to allow quick & easy application on compound curves in addition to moderate recesses. While using this adhesive, expect the graphics to look crisp & vibrant, with minimal substrate show-through. Plus, the time to remove the adhesive, can count on it coming off cleanly & easily.

METAWRAP MDX - CYLINDER CAST DIGITAL WRAPPING MEDIA

MetaWrap MD-X is a 50-micron ultra-conformable, extensible digital wrapping media, supplied with the MetaScape® air
release adhesive system to allow quick and easy application on compound curves as well as moderate recesses.

The grey blockout adhesive ensures vibrant graphics and minimal substrate show-through. The film offers high levels
of dimensional stability and brilliant colour reproduction on Solvent, Eco-Solvent and Latex printers.

SPECIFICATION

Face Film: 50 Micron Ultra-Comfortable vinyl.
Roll Widths: 0.76m / 1.37m / 1.60m.
Roll Lengths: 10m / 25m / 50m.
Durability: 7 years.
Shelf Life: 2 years.
Adhesive: MetaScape® Permanent Grey Solved – Based Acrylic with air channels.
Liner: 140gsm Structured Layflat PE Kraft Liner.
Printing: Solvent/Eco-Solvent/Latex Inks.
Finishes: White Gloss.

FEATURES & BENEFITS

Carbon Neutral Product.
Cylinder Cast Film for 3D wraps, channels & recesses.
MD Series for best-in-class print quality & wide colour gamut.
Engineered to give long-term dimensional stability.
MetaStream ReadyTM – can be recycled in our closed-loop recycling scheme.

PRINTING & HANDLING

Retained solvents, drying conditions & colour saturation can significantly reduce adhesion.
Solid, saturated dark colours can require more than 48 hours.
Successful vehicle wrap application requires the necessary techniques.
The product is designed to be used with a dry application, apply 65-75°C heat to soften the film & allow conformability.
After use superheat the film into recesses at 100-105°C.

PRINTING & HANDLING

Ensure that the correct profiles & heater settings are used.
The material has to reach room temperature & relative humidity of 50% before printing.
Do not handle the face film & verify free from dust & static.
Over-lamination is recommended to prevent abrasion, extend colour fastness & also offer easier handling.
The ink is to cure before laminating & a minimum of 48 hours for the solvents to out-gas before over-laminating.
Solid, saturated dark colours can require more than 48 hours to dry.
MetaStream can be recycled in our closed-loop recycling scheme.

error: Please Write Your Own Content !!